Back to the list
Congress: ECR25
Poster Number: C-19231
Type: Poster: EPOS Radiologist (scientific)
Authorblock: A. Kazhybekova, T. Omahony, S. Tracy, I. Hernandez-Giron; Dublin/IE
Disclosures:
Ainur Kazhybekova: Nothing to disclose
Tristan Omahony: Nothing to disclose
Saoirse Tracy: Nothing to disclose
Irene Hernandez-Giron: Nothing to disclose
Keywords: Radiation physics, CT, Observer performance, Physics, Image verification, Quality assurance
References

[1] L.R. Koetzier, D. Mastrodicasa, T.P. Szczykutowicz, N.R. van der Werf, A.S. Wang, V. Sandfort, A.J.van der Molen, D. Fleischmann, and M.J. Willemink, 2023. Deep learning image reconstruction for CT: technical principles and clinical prospects. Radiology, 306(3), p.e221257. https://doi.org/10.1148/radiol.221257

[2] Mei, K., M. Geagan, L. Roshkovan, H.I. Litt, G.J. Gang, N. Shapira, J.W. Stayman and P.B. Noël, 2022. Three-dimensional printing of patient-specific lung phantoms for CT imaging: emulating lung tissue with accurate attenuation profiles and textures. Medical physics, 49(2), pp.825-835. https://doi.org/10.1002/mp.15407

[3] E.R. Weibel and D.M. Gomez, 1962. Architecture of the human lung: use of quantitative methods establishes fundamental relations between size and number of lung structures. Science, 137(3530), pp.577-585. https://doi.org/10.1126/science.137.3530.577

[4] Dassault Systèmes, 2025. MJF Multi Jet Fusion 3D Printing Service. Available at: https://www.3ds.com/make/service/3d-printing-service/mjf-multi-jet-fusion [Accessed 11 February 2025].

[5] Baker Hughes, 2020. Phoenix-Vtomex-M-EN-BHPD-31319-052020. Available at: https://dam.bakerhughes.com/m/21546a4bcfaa41ad/original/Phoenix-Vtomex-M-EN-BHPD-31319-052020-pdf.pdf (Accessed: 14 February 2025).

[6] i.materialise, 2025. Rubber-like material design guide. [online] Available at: https://i.materialise.com/en/3d-printing-materials/rubber-like/design-guide [Accessed 14 February 2025].

[7] I. Hernandez-Giron, P. McHale, A. Gaffney, B. Snow, J. Egan, C. D'Helft, R. Byrne, W. Veldkamp, J. den Harder, 2024. RPS 313-4: Anthropomophic 3D printed lung vessel phantoms combined with lung. ECR 2024 Book of Abstracts. Insights Imaging 15 (Suppl 2), 223 (2024). https://doi.org/10.1186/s13244-024-01766-w

[8] R.M Joemai and J. Geleijns, 2017. Assessment of structural similarity in CT using filtered backprojection and iterative reconstruction: a phantom study with 3D printed lung vessels. The British journal of radiology, 90(1079), p.20160519. https://doi.org/10.1259/bjr.20160519
GALLERY